Matching a Roofline to the Lights Already on the House: A Naperville Install
August 30, 2026 · 3 min read
This Naperville home is a modern English Tudor — limewashed brick, black trim, two steep front gables, an arched limestone entry, and a pair of gooseneck barn lights over the garage. The owners wanted permanent lighting along the front roofline, but only if it looked like it had always been part of the house.
That put most of the weight on the everyday setting. It had to do one thing well: blend into the home's existing lighting. Here's how the front-of-home system was set up, and what it does the rest of the year.
One Run, Across the Whole Front
The install covers the front roofline in one continuous run of fixtures: both gable peaks, the main eave line, the fascia under the second-floor balcony, and the garage eave. Everything is color-matched to the black trim and mounted flush, so there's no hardware line breaking up the roofline during the day.
Front of Home was the right scope here. Everything the street sees — the twin gables, the balcony, the arch — sits on this one elevation, so the whole front runs on the same color and the same schedule, with nothing to sync.
Everyday Warm White, Tuned to the Existing Fixtures
The two gooseneck lights over the garage were already there, and they set the tone for the front of the house — a specific warm white the owners liked. The new roofline had to match it, not sit beside it a few degrees cooler or a step brighter.
Every TruLight node runs true RGBW — three dedicated warm-white LEDs alongside the RGB, not a white blended in software — so the warm white is a real, adjustable setting. We dialed it in on site to sit with the gooseneck bulbs, so at night the roofline and the existing fixtures read as one lighting scheme instead of two systems on the same wall.
Nearly Invisible by Day
The fixtures are color-matched to the black fascia and tucked flush along the trim. From the street with the system off, there's no strip, no bulky channel, nothing that reads as "lights." Even lit at dusk, the nodes nearly disappear against the dark trim.
One Tap to a Full-Color Scene
Same run, same install: in the TruLight app, the front of the house switches from everyday warm white to a saved color scene and back. For the Fourth of July that's red, white, and blue across both gables and the balcony line; the next morning it's warm white again, with nothing to take down.
That was the trade the owners were weighing — lighting that stays invisible 360 nights a year and still has something for the other five. The front-of-home system covers both.
Frequently Asked Questions
Will permanent lighting clash with the fixtures already on my house?
It doesn't have to. Because the system runs true RGBW with dedicated warm-white LEDs, the everyday warm white is an adjustable setting — we tune it on site to sit with your existing porch, coach, or gooseneck fixtures so the roofline reads as part of the same lighting scheme, not a separate system on top of it.
Can I get just the front of my house done?
Yes. Front of Home is one of our standard packages. On this Naperville house it covered both gable peaks, the main eave, the balcony fascia, and the garage eave in one continuous run — everything the street sees, on one color and one schedule.
Are the lights visible during the day?
Barely. The fixtures are color-matched to your trim and mounted flush along the fascia or soffit, so with the system off they're very hard to pick out from the street. At night they do the work; by day they stay out of the way.
How do I switch to holiday colors?
In the TruLight app. Everyday warm white, red and green for Christmas, red white and blue for the Fourth of July, your team's colors on game day — each is a saved scene you tap, with no rewiring and nothing to put up or take down.
The brief for this house was simple: look like it had always been there, and still have something to show on the Fourth of July. One front-of-home run, tuned to the fixtures already on the wall, does both.
Call us at 630-552-6331 or request your free quote, and we'll match a system to your home — existing fixtures and all.